Loviselle: The Newer Sculptra Alternative, Explained by a Doctor

Loviselle is a collagen stimulator made from the same ingredient as Sculptra: PLLA, short for poly L lactic acid. Neither one is a traditional filler. Instead of plumping a line on the day, both are injected into the deeper skin layers, where they prompt your body to build its own collagen over the following months. The result is gradual, natural looking volume and firmer skin, rather than an instant change.

So what is actually different? Three things. Loviselle is made in China by Changchun SinoBiomaterials, while Sculptra is made by Galderma. Loviselle’s PLLA comes as smooth, round microspheres, while Sculptra’s comes as irregular flakes. And Sculptra has more than twenty years of clinical studies behind it, while Loviselle is much newer. In this guide, our doctors explain what those differences mean in practice, who each one suits and what results to expect.

New Customer Special ✨

Before you dive in, here’s a little gift from us!

We are giving away 2x Free Hydrating Masks to help you keep your skin fresh and glowing. Open to all.

Table of Contents

Key Takeaways

What is Loviselle? Loviselle is a PLLA collagen stimulator from China, sometimes called the “baby face” injection, that rebuilds lost volume by prompting your skin to make new collagen.

How is Loviselle different from Sculptra? Both use PLLA, but Loviselle’s particles are smooth microspheres while Sculptra’s are irregular flakes, and Sculptra has a much longer clinical track record.

Is Loviselle a filler? No. A filler adds volume straight away, while Loviselle builds your own collagen gradually, so results appear over two to three months.

How long do the results last? A completed course of Sculptra has been shown to last up to around two years, and Loviselle’s manufacturer reports a similar duration.

Which one should I choose? Both can give excellent, natural results; the choice depends on your face, your goals and how much weight you place on long term data, which is a conversation for your doctor.

Loviselle vs Sculptra at a Glance

Feature Loviselle Sculptra
Made by Changchun SinoBiomaterials, China Galderma
Active ingredient PLLA (poly L lactic acid) PLLA (poly L lactic acid)
Particle shape Smooth, round microspheres Irregular flakes
Other ingredients Carboxymethyl cellulose and mannitol Carboxymethyl cellulose and mannitol
Preparation Mixes into an even suspension quickly Usually mixed well ahead of treatment
Typical course Usually 3 sessions, about 4 to 6 weeks apart Usually 2 to 3 sessions, about 4 to 6 weeks apart
When results show Gradually, from about 4 to 6 weeks Gradually, from about 4 to 6 weeks
How long results last Up to around 2 years (manufacturer data) Up to around 2 years, with benefit seen at 25 months in a clinical trial
Track record Approved in China in 2021 FDA approved in 2004, with cosmetic approval in 2009

Collagen Stimulator or Filler? What PLLA Actually Does

PLLA does not fill. It signals. That is the single most important thing to understand before choosing Loviselle or Sculptra. A hyaluronic acid filler is a gel that sits under a line or hollow and lifts it, so you see the change the same day. PLLA is a biodegradable material, the same family used in dissolvable stitches, that is placed in the deeper layer of skin. Your body notices it and responds by sending fibroblasts, the cells that make collagen, to the area. Over the following weeks they lay down new collagen around the particles, while the PLLA itself slowly breaks down and disappears.

You may notice some fullness right after treatment, but that is mostly the water used to mix the product, and it settles within a few days. The real result arrives later and builds slowly, which is exactly why it tends to look so natural. Nobody sees a sudden change, only skin that looks fresher, fuller and firmer month by month.

That makes PLLA best suited to gradual volume loss: hollow temples, flattened cheeks, a softening jawline and thinning skin. It is not the right tool for sharp contouring of the lips or nose, where a filler gives more precise control.

Microspheres vs Flakes: What Is Actually Different

The most talked about difference between Loviselle and Sculptra is particle shape. Loviselle’s PLLA is made into smooth, round microspheres of a fairly uniform size, roughly 20 to 50 microns across. Sculptra’s PLLA comes as irregular, flake shaped particles.

In theory, smooth and evenly sized spheres disperse more evenly in the skin and mix more easily, which could make the product more predictable to inject and less likely to clump. That is a reasonable idea, and it is the main reason Loviselle has attracted so much interest in Asia. It is worth being honest, though: it has not yet been proven in head to head clinical trials against Sculptra. The shape of the particle matters, but so do the dilution, the depth of injection and the aftercare, all of which are in the hands of the doctor.

Does Newer Mean Better? The Evidence So Far

Newer does not automatically mean better, and the honest answer is that Sculptra has far more evidence behind it. Sculptra was approved by the US FDA in 2004 to restore facial volume lost in people living with HIV, and in 2009 for cosmetic use in healthy adults. In a randomised trial of 233 patients published in the Journal of the American Academy of Dermatology in 2010, its benefit on smile lines was still seen 25 months after the last treatment. A more recent randomised trial on cheek wrinkles, published in the Journal of Drugs in Dermatology in 2024, found that 71.6% of treated patients had improved at 12 months, compared with 26.1% of untreated controls.

Loviselle is much younger. It was approved in China in 2021, and most of the data available so far comes from the manufacturer and laboratory work rather than large independent trials. That does not mean it is less effective, and early clinical experience in Asia is encouraging. It simply means the long term track record is still being written.

Who Suits Loviselle, and Who Suits Sculptra

Both can give excellent results in the right hands. These are the general patterns our doctors use as a starting point.

1.Early hollowing in your 30s or early 40s: either works well. Loviselle is a popular choice for a softer, more youthful “baby face” refresh.

2.Deeper volume loss in the temples or cheeks: Sculptra is often favoured for its long clinical track record in restoring volume.

3.A softening jawline or early sagging: either, often combined with a skin tightening treatment for the best result.

4.Facial thinning after weight loss: either, planned over several sessions to rebuild support gradually.

5.You want the treatment with the most long term data: Sculptra.

PLLA is not suitable if you are pregnant or breastfeeding, have an active skin infection in the treatment area, have a tendency to form keloid scars, or have certain autoimmune conditions. If you need an instant result for an event next week, a filler is the better tool.

What Results Actually Look Like

PLLA results are a slow reveal, so it helps to know what to expect at each stage.

  • The first few days: some fullness from the mixing fluid, plus possible mild swelling, redness or small bruises. This settles within a few days.
  • Weeks 4 to 6: the first real change appears as new collagen starts to form.
  • Months 2 to 3 after your final session: the full result becomes visible, with fuller contours and firmer skin.
  • Up to around 2 years: results typically last, and a single maintenance session keeps them going.

Because PLLA cannot be dissolved the way a hyaluronic acid filler can, it is always worth building results gradually over a course rather than trying to do everything in one session.

Talk to Us First

The single most useful thing you can do before booking any double chin treatment is find out which type you actually have. That one answer changes the treatment, the number of sessions and the cost.

A first visit is straightforward. We assess the area, check whether fat, laxity or muscle is driving it, take a baseline photograph so you have something honest to compare against later, and talk through what is realistic for your skin. There is no obligation to start treatment on the day.

Book an assessment at Five Clinic Puchong or Bangsar and we will talk you through what is realistic for your skin.

Frequently Asked Questions

Yes, in most mild to moderate cases. Fat dissolving injections and fat freezing reduce fat, while HIFU and radiofrequency tighten skin. Severe laxity or prominent muscle banding still responds best to surgery.

Pinch the area under your chin. A thick soft roll suggests fat, while a thinner fold that creases suggests laxity. A proper assessment confirms it, and many people need both addressed.

Neither is universally better, because they suit different skin. HIFU reaches deeper layers in a single intensive session, while radiofrequency spreads gentler heat over a course of treatments and is often more comfortable in the small area under the chin.

Destroyed fat cells do not return, though remaining ones can enlarge with weight gain. Tightening results fade gradually as collagen loss continues, so maintenance sessions help.

Sometimes, but not always. Weight loss can reduce submental fat, though it does nothing for skin laxity and can occasionally make loose skin more noticeable once the underlying volume is gone.

Five Clinic®
Book your free consultation with Five Clinic today and start your journey to healthier, glowing skin!

Make An Appointment

Search